Step by Step Guide in measuring your vanity and selecting the right size vanity for your bathroom

Choosing the perfect vanity size for your bathroom requires precise measurements and careful consideration of space and functionality. Begin by measuring the available space, noting width, depth, and height limitations. Consider door and shower clearances to ensure your vanity doesn’t obstruct movement. Next, think about storage needs and how the vanity will be used daily. For small bathrooms, a floating vanity can save floor space, while larger areas may accommodate double sinks. Balance size with aesthetics, ensuring your vanity complements the bathroom’s overall design. Proper sizing not only enhances functionality but also elevates the look of your bathroom.

Measuring your existing vanity is the first step in finding the right vanity replacement. Here’s a simple guide:

  1. Width: Measure the width of the vanity from one side to the other. Start from the left edge and extend the measuring tape or ruler to the right edge. Note down this measurement.
  2. Depth: Measure the depth of the vanity from the back wall to the front edge. Begin at the wall and extend the measuring tape or ruler to the outermost point of the vanity. Record this measurement.
  3. Height: Measure the height of the vanity from the floor to the top edge. Start from the ground and measure up to the highest point of the vanity. Jot down this measurement.
  4. Clearance: Ensure to measure the distance between the vanity and nearby fixtures or walls. This clearance is essential for the new vanity to fit comfortably without obstruction

By following these steps, you’ll have accurate measurements of your existing vanity, helping you find the right vanity replacement that fits seamlessly into your bathroom remodel.

Choosing between a single or a double sink vanity depends on your needs and space constraints. Here are some pros and cons to consider when selecting the right vanity for your remodel.

Single Sink Vanity.

Pros:

  • Space Efficiency: A single sink vanity is ideal for smaller bathrooms or powder rooms where space is limited. It takes up less room than a double sink vanity, allowing for more walking space or room for other fixtures.
  • Cost-Effective: Generally, single-sink vanities are less expensive than double-sink options. This includes lower costs for the vanity itself, and potentially lower costs for installation, faucets, and plumbing.
  • More countertop space: Offers more countertop areas for toiletries, decorations, or storage.
  • Simplicity in Plumbing: A single sink vanity requires less plumbing work than a double sink vanity, which can simplify installation and maintenance, as well as reduce initial plumbing costs.

Cons:

  • Limited usability: Only one person can use the sink at a time, which may be inconvenient during busy mornings.
  • Less storage: Typically has fewer drawers or cabinets compared to double sink vanities, which could impact storage options.
  • Resale Value Impact: In some markets, especially in homes with larger bathrooms, double-sink vanities are expected in the master bath. A single sink could be seen as a negative by potential homebuyers who value dual-sink convenience in primary bathrooms.
  • Aesthetic Limitations: In a large bathroom, a single sink vanity might look disproportionate or too small, affecting the overall aesthetic and balance of the space.

Double Sink Vanity.

Pros:

  • Convenience for Multiple Users: One of the most significant advantages is that it allows two people to use the vanity area simultaneously, reducing wait times during busy morning and evening routines.
  • Increased Resale Value: Homes with double sink vanities, especially in the master bathroom, are often more appealing to potential buyers, potentially increasing the home’s resale value
  • More Storage: Typically, double-sink vanities are larger and offer more storage options, including drawers, shelves, and cabinets. This can be beneficial for storing towels, toiletries, and other bathroom essentials.

Cons:

  • Space-consuming: Requires more floor space, which may not be suitable for smaller bathrooms.
  • Higher cost: Generally, more expensive to purchase and install compared to single-sink vanities.
  • Potential plumbing complexities: Installation may require additional plumbing work, especially if not already set up for dual sinks.

Consider your bathroom size, usage needs, and budget to determine whether a single or double-sink vanity is the best fit for your space.

Deciding between a freestanding or wall-hung vanity depends on your preferences, space, and style. Here are some factors to consider when selecting the right vanity for your remodel.

Freestanding Vanity:

Pros:

  1. Easier Installation: Requires minimal installation effort and can be placed anywhere in the bathroom.
  2. Versatility: Available in various styles, sizes, and materials to suit different bathroom aesthetics.
  3. Storage: Often comes with built-in storage options like drawers and cabinets, providing ample space for toiletries and other essentials.
  4. Classic Look: Adds a traditional and timeless feel to the bathroom decor.

Cons:

  • Floor Space: Takes up floor space, which may not be ideal for smaller bathrooms or if you want a more spacious feel.
  • Cleaning: Cleaning around the base of the vanity may be more challenging compared to wall-hung options.

Wall-Hung Vanity

Elegant Furniture Lighting VF44548MBL Penn 48 Inch Single Sink Bath Vanity, Blue

Pros:

  1. Space-saving: Maximizes floor space, making it ideal for smaller bathrooms or those aiming for a minimalist look.
  2. Easy Cleaning: Allows for easy cleaning underneath, making it convenient to maintain hygiene.
  3. Modern Aesthetic: Provides a sleek and contemporary look to the bathroom, often favored by those with modern design preferences.
  4. Customizable Height: Can be installed at a height that suits your comfort and preferences.

Cons:

  • Installation Complexity: Requires proper mounting to the wall, which may involve additional support and professional installation.
  • Limited Storage: Typically offers less storage space compared to freestanding vanities, which might be a drawback for those needing ample storage.

Consider your bathroom layout, size, style preferences, and storage needs when choosing between a freestanding or wall-hung vanity to ensure it complements your space effectively.

Selecting the best material for a vanity top depends on factors such as durability, aesthetics, maintenance, and budget. Here’s a comparison of popular materials

1. Marble.

  • Pros: Elegant appearance, timeless appeal, heat resistance, and durability.
  • Cons: Porous surface prone to staining, requires regular sealing and maintenance, and can be expensive.
James Martin 545-V72-LNO-3CAR Laurent 72 Inch Light Natural Oak Double Sink Vanity with 3 cm Carrara Marble Top

2. Granite.

  • Pros: Durable, scratch-resistant, heat-resistant, wide range of colors and patterns.
  • Cons: Requires periodic sealing to prevent staining, can be costly, limited availability of certain colors.

3. Quartz.

  • Pros: Non-porous surface resistant to stains, scratches, and bacteria, low maintenance, wide variety of colors and patterns.
  • Cons: Can be more expensive than other materials, not as heat resistant as natural stone.
James Martin 650-V48-UGR-3CBL Brittany 48 Inch Single Vanity Cabinet with Cala Blue Quartz Top – Urban Gray

4. Solid Surface.

  • Pros: Seamless integration of sink, easy to clean, wide range of colors and patterns, repairable scratches and dents.
  • Cons: Less heat resistant than natural stone, can be susceptible to scratches and cuts.

5. Acrylic.

  • Pros: Affordable, moisture resistant. Resistant to scratches, chips, and stains. Easy to clean.
  • Cons: Limited designs and colors. Less heat resistant than stone.
Alya Bath AT-8063-B-72 Ripley 70 7/8 Inch Freestanding Double Sink Bathroom Vanity, Black

6. Engineered Stone (e.g., Silestone, Caesarstone).

  • Pros: Non-porous surface resistant to stains, scratches, and bacteria, low maintenance, uniform appearance.
  • Cons: Can be more expensive than other materials, limited availability of colors and patterns.

Consider your preferences in terms of appearance, maintenance requirements, and budget when selecting the best material for your vanity top. It’s also essential to assess the specific needs of your bathroom in terms of durability and resistance to moisture and heat.

In conclusion, selecting the right vanity for your bathroom remodel is a crucial decision that requires thoughtful consideration of space, functionality, and style. At KB Authority, we understand the importance of finding the perfect balance between aesthetics, durability, and practicality. Our team is dedicated to helping you navigate the various options, from choosing between single or double sinks to deciding on freestanding versus wall-mounted vanities and selecting the ideal material for your vanity top. With our expertise, we can guide you through the process, ensuring that you make the right choice to enhance the beauty and functionality of your bathroom.

How to Choose the Perfect Vanity for Your Bathroom with Light-Colored Tiles: A Step-by-Step Manual

On the journey of designing a bathroom, choosing the right vanity stands out as a crucial decision. In this comprehensive guide, we’ll delve deep into the nuances of selecting the perfect vanity for bathrooms adorned with light-colored tiles. Through a series of meticulously crafted questions, we aim to provide you with a roadmap that not only ensures functionality but also elevates the visual appeal of your bathroom space.

Bathroom Vanity with Light

What’s Your Bathroom Style?

When picking out the perfect bathroom sink and cabinet, think about what style you like. Is it more modern, traditional, or a mix of both? Light-colored tiles are like a blank canvas that can match lots of different styles. Think about what you like and what’s already in your bathroom to create a design that fits well together. Start by figuring out your bathroom’s style!

For a modern bathroom, consider the Modero 36″ White Single Vanity, featuring clean lines and a sleek white finish.

How Do You Coordinate with Tile Undertones?

When you have light-colored tiles in your bathroom, they can have different shades like warm beige, cool gray, or neutral white. The trick is to pick a vanity color that goes well with these shades so everything looks nice together. Let’s talk about matching colors! If your tiles are warm, like the color of sand or coffee, think about using a vanity in earthy tones like walnut or espresso. On the other hand, if your tiles are cool, like a rainy day, you might want a vanity in colors like white, gray, or even calming blue. It’s like putting puzzle pieces together to make your bathroom look awesome!

To complement warm undertones, the James Martin Furniture 48″ Single Bathroom Vanity in warm cherry wood offers a timeless appeal. For cool undertones

Does Size Matter in Your Bathroom?

Choosing the right vanity for your bathroom is like picking the perfect puzzle piece – it has to fit just right! Think about the size of your bathroom, almost like measuring it with a giant ruler. If your bathroom is small, a big vanity might take up too much space, like a giant in a tiny room. On the other hand, a small vanity in a big bathroom might feel like using a small puzzle piece in a large puzzle – it won’t fill the space properly. So, finding the right-sized vanity is super important to make your bathroom look and feel just perfect!

the Ariel 43″ Single Bathroom Vanity Set offers a compact yet stylish solution. In more spacious settings, the Kohler 60″ Double Bathroom Vanity Set provides ample storage and countertop space without overwhelming the room.

What Are Your Storage Needs?

Bathrooms have a lot of stuff like skincare things, towels, and other important stuff. So, it’s super important to think about where to put all of it. Check out what you need to store, like your skincare products or towels. Look at vanities with cabinets, drawers, and shelves to see which one helps you keep things organized better. Make sure the vanity you pick doesn’t just meet but goes above what you need to keep everything tidy.

Bathroom Vanity with Light

Which Material Suits Your Taste and Lifestyle?

The material of your vanity is a defining factor, contributing not only to its aesthetic appeal but also its durability. Dive into the characteristics of various materials – wood, MDF, metal, and glass. Unpack the timeless warmth of wooden vanities, the cost-effective allure of MDF, and the sleek, modern elegance of metal and glass.

If you’re looking for a budget-friendly alternative with a wood-like appearance, the Robern 24″ Single Bathroom Vanity Set made from MDF offers style without compromising affordability.

What About Countertop Options?

The vanity countertop is not just a functional surface; it’s a visual centerpiece. Delve into the world of countertop materials – granite, marble, quartz, and laminate. Explore the nuances of each material, from the luxurious appeal of marble to the durability of quartz, and guide readers in making an informed decision that complements their light-colored tiles.

For a luxurious touch, the Bemma Design Wood Single Bathroom Vanity features a stunning marble countertop.

Have You Given Due Thought to Hardware?

Think of the hardware on your bathroom vanity like the jewelry that makes it look cool or not-so-cool. The knobs, handles, and faucets are the special accessories. Let’s explore different finishes for these accessories, like shiny chrome or warm oil-rubbed bronze. I’ll help you choose hardware that goes well with other things in your bathroom, so everything looks nice and fits together.

 Alternatively, the Elegant Furniture Single Bathroom Vanity Cabinet can infuse warmth and character into your vanity.

How Will You Address Lighting Needs?

Good lighting makes a big difference in a bathroom, especially when you have light-colored tiles. Let’s talk about where to put the lights. Think about putting lights on the walls next to the mirror for even and good lighting. We’ll also look at how different light colors can change the feel of your bathroom. I’ll help you choose lights that make your light-colored tiles look even better and brighter!

For a stylish lighting solution, the Craftmade Celeste 3-Light Dimmable Vanity Light offers adjustable sconces for optimal illumination.

Bathroom Vanity with Light

How Do You Integrate Accent Colors?

Light-colored tiles are like a blank canvas for your bathroom, and you can add fun colors to make it awesome! Think of towels, rugs, and wall art as your special tools for making everything look cool. Try picking colors that go really well with the light tiles or ones that pop out and make a big statement. This will make your bathroom look lively and exciting!

For a pop of color, the Vinnova 60″ Single Bathroom Vanity pairs well with vibrant towels or artwork.

Have You Tested and Visualized?

Before making a final decision, practical testing and visualization are key. Dive into the importance of obtaining samples for both the vanity and tile materials, allowing readers to physically see and touch their prospective choices. Guide them in placing these samples in the bathroom, observing how they interact with natural and artificial light throughout the day.

Picking the perfect bathroom vanity for light-colored tiles is a bit like learning a special dance. Imagine you have a set of questions as your dance steps, making everything easier. First, think about how your bathroom looks and whether it matches your tiles. Then, figure out if you need extra space to keep your things and picture how everything will look together.

Bathroom Vanity with Light

As you go through this helpful journey, check out the advice from The Kitchen and Bath Authority. They’ll be like your guide, helping you with these questions to create a bathroom that’s just right for you – stylish and super practical. Take your time to try different ideas and picture how they’ll look in the end. Think of these questions as your friendly helpers while you make choices for a bathroom that shows off your style and meets all your needs.

Bathroom Beauties: Selecting the Right Vanity for a Small Bathroom

Are you ready to dive into the fascinating world of bathroom design, with a special focus on a crucial element – vanities? Can you imagine transforming your small bathroom into a space that feels right for you? In this guide, we’ll delve deep into the secrets of selecting the ideal vanity for a small bathroom. Ready to dive in and create your dream bathroom? Let’s get started!

Bathroom Vanity

Understanding Your Space:

Have You Unlocked the Treasure Map to Your Bathroom?                                          

Ever wondered how to make your bathroom puzzle? It all starts with understanding your space. Can you grab a tape measure and jot down the length, width, and height of your bathroom? How do these measurements serve as the blueprint for creating your perfect bathroom sanctuary? 

For a small bathroom, consider a compact vanity like the “Ove Decors Pembroke Free Standing Bathroom Vanity“. Its sleek design is perfect for maximizing space without compromising on style.

Have You Explored the Layout of Your Bathroom?

Have you ever wondered where to put the bathroom sink? Well, it’s kind of like planning a treasure hunt in your bathroom! First, think about how your bathroom is set up. Are there certain spots that could be better for the sink than others? It’s like having a map to guide you on your quest to make your bathroom look awesome!

Storage Magic:

Are You Ready for Storage Superhero Secrets?

Now, let’s talk about storage – the unsung hero of bathroom organization. Can you picture all the items you use in the bathroom – toothbrush, toothpaste, shampoo, and maybe even some cool bath toys? How does a good vanity become a storage superhero that conceals the clutter? Look for vanities like the “Design Element Klein 24 Inch Bath Vanity” with ample cabinet space to keep your bathroom tidy.

Bathroom Vanity

Have You Discovered the Vanity with Hidden Powers?

When exploring vanities, be on the lookout for those with cabinets or drawers. How can these additional storage spaces keep your bathroom looking tidy and organized? Have you thought about what items you’d like to store? Choosing a vanity with the right combination of drawers and cabinets is like solving a storage puzzle.

Size Matters:

Are You on the Hunt for the Goldilocks Vanity?

Not all vanities are created equal when it comes to size. Some are tall and imposing, while others are short and sleek. Your task is to find the Goldilocks of vanities – one that fits just right in your bathroom space. How does finding the right balance between functionality and space conservation play a crucial role in a small bathroom?

Bathroom Vanity

Have You Measured the Blueprint of Your Vanity Space?

First, check the space where you want to put the bathroom cabinet. Imagine how it will look in your bathroom. Think about how a cabinet that doesn’t use too much space but still holds all your things can make your bathroom look nice. Do you have any specific ideas for how you want your bathroom to look?

Materials Matter

Have You Unleashed the Magic of Vanity Materials?

Vanities come in a variety of materials, each with its unique charm. How does wood exude warmth and coziness, glass brings a touch of modern elegance, and metal adds a sleek and contemporary vibe?

Is Your Vanity Material a Reflection of Your Style?

Have you considered the overall theme and ambiance you want in your bathroom? Do you lean towards a classic, timeless feel, or are you more drawn to a modern and minimalist aesthetic? How does the material of your vanity align with your style and contribute to the overall design harmony?

Consider the “Bemma Design Terra 36 Inch Free-Standing Bathroom Vanityy for a modern touch. Its glass countertop and sleek design add a contemporary vibe to your small bathroom.

Style Exploration:

Now, let’s dive into the fun part – exploring different styles. How is your bathroom like a canvas waiting for your artistic touch, and the vanity is your paintbrush? There are numerous styles to choose from – classic, modern, eclectic, or even a fusion of different elements. The key is to pick a style that resonates with your personality and makes you smile every time you step into the bathroom. consider the “Bemma Design Gracie 36 Inch Free-Standing Bathroom Vanity“. Its compact size doesn’t compromise on functionality, providing the right balance between style and space conservation.

Have you thought about the existing decor of your home? Is there a particular theme or style that you’d like to extend into your bathroom? How do mixing and matching styles result in a unique and personalized look? Embrace your creativity and let your imagination run wild as you envision your dream bathroom style.

Color Splash

Can You Picture the Magic of Color in Your Bathroom?

Colors have the power to transform a mundane bathroom into a vibrant and inviting space. How is your bathroom like a blank canvas waiting for the magic of colors to unfold?
Colors can transform a mundane bathroom into an inviting space. For a pop of color, check out the Elegant Furniture Lighting Baldwin Single Sink Bath Vanity with its stylish blue finish. It’s a bold choice to make your vanity a focal point in the room.

When selecting the color for your vanity, consider the overall color scheme of your bathroom. Do you want a cohesive look where the vanity blends seamlessly with the walls and tiles, or are you inclined toward creating a focal point with a bold and contrasting color? How does the right color choice set the tone for your entire bathroom design?

Bathroom Vanity

Easy-Peasy Installation:

Are You Ready to Master the Vanity Installation Adventure?

Installing furniture might sound like a job for grown-ups; however, fear not—many vanities are designed with user-friendly installation in mind. It’s akin to putting together a giant LEGO set; consequently, you get to be the master builder of your bathroom kingdom.

Have You Explored the Vanity Assembly Instructions?

Did you check out the instructions for putting together the vanity? Lots of new vanities have simple guides, and some even have videos online to help. If you get stuck, just ask an adult for help. With a little guidance, putting it together can be pretty fun. Before you know it, your bathroom will look totally cool and show off your awesome style!

Budget-Friendly Choices:

Making your dream bathroom can be affordable and fun! You don’t need to spend a lot of money. Look for sales, discounts, and promotions at furniture stores to find great vanity options that match your style. This way, you can create a fantastic bathroom without spending too much.

Remember, it’s not about the price tag; it’s about making smart choices that bring your vision to life. A well-thought-out design, paired with budget-friendly options, can result in a bathroom that feels luxurious without the hefty price tag. Any specific ideas on how you’d like to balance style and budget in your bathroom design?

Check out budget-friendly options like the Modway Laguna Bathroom Vanity. It offers a stylish design without compromising on quality.

Maintenance Magic:

Are You Ready to Maintain Your Vanity’s Superhero Powers?

Every superhero needs a bit of care to maintain their powers, and your vanity is no exception. How can adopting a routine maintenance plan ensure your bathroom stays picture-perfect?

When considering the material of your vanity, it’s crucial to choose cleaning products wisely to avoid any potential damage. Additionally, incorporating simple maintenance habits, such as promptly wiping off spills and regularly cleaning surfaces, can significantly extend the lifespan of your vanity and contribute to keeping your bathroom looking fresh and inviting. Have you developed a comprehensive plan for maintaining your vanity’s superhero powers?

Are any Specific Ideas Popping Up for Your Dream Bathroom?

Awesome work, young designers! You’ve just unraveled the mysteries of selecting the ideal vanity for your small bathroom, all thanks to the wisdom of space, storage, size, materials, style, color, installation, budget, and maintenance.

Armed with this knowledge, courtesy of Kitchen and Bath Authority, you’re fully equipped to fashion a bathroom that’s distinctly yours. Your canvas awaits, and you’re the artist. Unleash your imagination to create a bathroom that mirrors your personality. Happy designing! Are there any specific ideas buzzing in your head for your dream bathroom on Kitchen and Bath Authority?

What Types of Bathroom Vanity Materials Should You Use?

When it comes to bathroom remodeling, few upgrades can have a bigger impact than the bathroom vanity. In addition to providing a functional space for shaving, putting on makeup, brushing your teeth, and taking care of other daily tasks, the vanity serves as a visual focal point for the bathroom.

While you should certainly consider the look of your vanity when planning an upgrade or remodel, it may also be helpful to consider the materials that are being used in the construction of the vanity cabinet.

The most common materials used for bathroom vanities are solid wood, particle board, MDF (medium density fiberboard), and plywood. While most materials can be suitable for your new vanity installation, they also come with their own set of pros and cons you should be aware of.

By understanding the differences between these different bathroom vanity materials, you can select the option that will work best with what you have in mind for your bathroom.

Solid Wood

solid wood vanity

As with other furniture products, solid wood is generally going to be considered the most durable option for a traditional vanity. Solid wood vanities actually cover two categories — 100 percent natural wood, and solid hardwood. The greatest distinction ultimately lies in the type of wood that is used in construction. 

Oak is generally considered to be the strongest wood for bathroom vanities, and is commonly used in vanities like the Vinnova 755048-GR-WH-NM Pavia 48 Inch Single Vanity in Grey with Acrylic Undermount Sink without Mirror or the Water-Creation CH72A-0300GK Chestnut 72 Inch Double Bathroom Vanity in Grey Oak.

However, options like poplar or teak, such as in the Avanity COVENTRY-V60-NT Coventry 60 Inch Vanity Only in Natural Teak also provide quality results. Solid wood vanities bring a traditional, timeless look with a natural finish or a stain that cannot be imitated by other materials. Of course, these materials can be painted in any color you desire.

The strength of solid wood also ensures that you aren’t limited in terms of countertop materials. Whether you prefer marble or acrylic, you can have confidence that the vanity will have the structural support necessary for the weight of your countertop.

While solid wood vanities are very durable, it is important to remember that bathroom conditions can still create problems for this material. Wood can expand as heat increases and as it absorbs moisture. In extreme cases, this expansion could cause some warping of the wood or cracks in a painted finish. A veneer or sealant may be necessary to prevent these issues.

If you choose a solid wood vanity, it is important that you keep the bathroom’s humidity levels under control with the help of a vent fan. This will keep the solid wood vanity from absorbing too much moisture, retaining the stunning look of its natural finish for decades to come.

Particle Board

particle board
CC BY-SA 3.0 by Rotor DB at Wikimedia Commons

In terms of bathroom vanity construction, particle board is generally considered to be on the opposite end of the spectrum from solid wood. Particle board is a composite sheet material using wood particles that are glued together, heated, and pressed into thin sheets. 

Particle board can vary in strength based on the size of the particles and the density of the sheets, however, it is generally considered to be too weak to support the weight of solid surface materials like quartz or granite. Over time, the weight of the countertop can actually cause particle board vanities to sag. Particle board vanities should use lighter countertop materials like acrylic.

Particle board is also more vulnerable to water, heat, and steam than other bathroom vanity materials. While coverings of wood veneer or laminate can offer some protection, the fact remains that the steamy conditions of your bathroom will likely cause a particle board vanity to break down over time. 

Yes, these vanities tend to be less expensive than those built from other materials — but in the long run, they could end up costing you more if you need to replace them due to water damage. Because of this, it is generally recommended to avoid vanities using particle board. You won’t find this material in the top of the line bathroom vanities carried here at Kitchen & Bath Authority.

MDF Bathroom Vanities

MDF bathroom vanity

MDF (medium density fiberboard) is a good “middle of the road” option for a bathroom vanity. Though it is engineered in a similar manner to particle board, it is much denser and stronger. The bits of wood used to create MDF are compressed for a longer time and at higher temperatures.

MDF bathroom vanities tend to be less expensive, and offer a smooth surface. Unlike solid wood, you don’t have to worry about contraction and expansion of the materials causing paint layers to crack. As a manufactured material, however, MDF cannot be stained like solid wood. However, it works well with lacquered paints, such as in the Kubebath BSL60D-GW Bliss 60 Inch Double Sink High Gloss White Wall Mount Modern Bathroom Vanity.

Because it shares some similarities to particle board, it also shares a few similar weaknesses. Exposure to water can cause MDF to swell, so the surface must be protected with a good sealant or a quality lacquer paint. MDF is also more difficult to repair if it is cracked or chipped. Stress cracks could make it easier for water to penetrate the material, and weaken it over time.

Though MDF can work well in a bathroom and is less expensive, its vulnerabilities to water mean it is often used in conjunction with solid wood. In vanities like the Legion Furniture WLF7040-36-CW 36 Inch Antique Coffee Vanity with WLF7040-37 Top, No Faucet, MDF is used in addition to solid poplar in areas that are less likely to receive frequent water exposure, while solid wood is used for the main “skeleton” of the vanity.

Plywood

plywood

Though not as high-end as solid wood, plywood can serve as a sturdy and reliable option for bathroom vanity materials. Plywood is comprised of wood veneers that are glued together in several layers to form a sheet of plywood. 

As with other manufactured wood products, the quality of the plywood may vary based on thickness and the quality of the materials used. While lower-grade plywood will use softer woods or contain voids between layers, higher-quality plywood will be solid and durable.

Remember, plywood is used as the underlayment for most residential roofing! This means it is quite sturdy, and far less likely to experience the performance problems associated with particle board. Finished plywood is water-resistant, meaning it is less likely to be damaged by steam or the occasional splash of water. Of course, if you have a pipe leak behind the bathroom vanity, you should still try to address the issue as soon as possible to avoid water damage.

Even more importantly, plywood actually resists the expansion and contraction that can occur in solid wood due to changes in temperature or humidity. This means that in many cases, it could last even longer than a solid wood vanity. 

Vanities like the Ariel A055SCWRVOWHT Cambridge 55 Inch Single Rectangle Sink Vanity, White and the Avanity MODERO-V36-NB Modero 36 Inch Vanity Only in Navy Blueuse plywood construction to deliver attractive, yet durable results.

Stainless Steel

Fresca vanity

Metal may seem like an unusual choice for a bathroom vanity material, but it is getting used more often in contemporary designs like the Fresca FVN1060 Attrazione 28.75 Inch Modern Glass Bathroom Vanity w/ Frosted Edge Mirror. Stainless steel provides a sleek, modern look that stands out in any bathroom.

Stainless steel is naturally waterproof. You don’t have to worry about exposure to moist, humid conditions deteriorating its appearance over time. Stainless steel is also resistant to mildew and rust. The elemental makeup of stainless steel also makes it resistant to heat and scratches — which is why this material is also commonly used for kitchen appliances.

While stainless steel is extremely well-suited for the bathroom environment, it does have a few drawbacks worth noting. Stainless steel tends to show smudges like fingerprints and water marks. This may require more frequent cleaning to keep them looking their best, which could prove to be quite a hassle in a child’s bathroom.

Because stainless steel is relatively new in the bathroom vanity world, it is primarily still used for pedestal vanities. Such vanities typically only have a towel bar — no extra storage areas. As a result, this slim and sleek design is great for a guest bathroom, but it might not be the best fit for your master suite.

How Can You Care For Your Bathroom Vanity Materials?

luxury bathroom

Other than particle board, any of the bathroom vanity materials listed above can serve you well, as long as they come from a quality manufacturer. While materials like solid wood and MDF can be vulnerable to water damage, many manufacturers use laminate coatings or specialty sealants to prevent such issues. This way, you get sturdy construction, as well as protection against water damage.

You’ll also want to pay attention to pricing and consider your countertop options. If you want a heavier countertop like granite or quartz, solid wood or plywood are your best bets — though a mixture of MDF and solid wood is also suitable. Double check the product specifications before making a selection so you can have confidence that the vanity you’re buying is made of your preferred materials.

Regardless of the type of bathroom vanity material you choose, however, you must take steps to minimize water exposure. The bathroom is naturally going to be humid and steamy. You can’t stop every drop of water from splashing on your vanity while washing your hands or shaving.

So, what to do? First, make sure to turn on the bathroom exhaust fan every time you take a shower. These fans draw in the moist, humid air that is being generated by the shower, helping to control humidity levels. It is generally recommended to leave the fan running for several minutes after your shower is over to help return humidity levels to normal.

You should also periodically check the area around your vanity for leaks. Don’t forget to look beneath the sink! The longer a leak goes undetected, the greater potential it has to cause significant damage to your vanity. With more durable vanity materials, catching a leak in its early stages shouldn’t result in any lasting issues.

Finally, wipe up any large water spills on the vanity surface. The longer water is allowed to remain on the surface, the greater chance it has of penetrating the vanity materials, where it can cause additional damage. When cleaning your vanity, always wipe the surface dry after you’re done cleaning.

While these care tips may seem relatively simple, these small everyday things are what will have the biggest impact on keeping your bathroom vanity looking and performing great for years to come.

Find the Right Bathroom Vanity at Kitchen & Bath Authority

No matter what type of bathroom vanity cabinet material you feel is the best choice for your renovations, you can expect high quality and great prices when you make your purchase at Kitchen & Bath Authority!

With thousands of vanities available from brands like Avanity, Vinnova, Fresca, Legion Furniture, and more, you have a near-endless selection of styles and finishes to choose from. Whether you’re updating the master suite or a half-bathroom, you’ll be sure to find the right fit for your house.

Best of all, our products are available at significant discounts off MSRP, allowing you to save hundreds of dollars when you buy a new bathroom vanity. Those who sign up for our exclusive membership program can also access additional discounts on items throughout our store. Toss in free shipping as well as deals and promotions that are regularly offered on items throughout our store, and it’s never been more affordable to update your bathroom vanity.

New sales and discounts are coming through all the time, so be sure to check back often! You’re sure to find the vanity that will help you transform your bathroom for the better.

What Materials Should You Use For Your Vanity Countertop?

When it comes to remodeling your bathroom, a few changes can have a greater impact than a new vanity. While many people focus on the color or design of the vanity or the number of drawers it has, the countertop should also be an important consideration when making your selection.

The countertop does much more than finalize the aesthetic appearance of your vanity. There are several different materials that can be used for a vanity countertop, and understanding the pros and cons of each option will help you make a selection that looks and performs great.

Here is a closer look at some of the most commonly used bathroom vanity countertop materials that you might want to consider for your home.

Acrylic

Eviva bathroom vanity

Acrylic is sometimes referred to as “plastic,” though in reality, these countertops are made from a mixture of resin and mineral components. The end result is a countertop that is surprisingly resilient and versatile. Acrylic countertops feature invisible seams, which can give any bathroom vanity a more upscale look.

Acrylic is nonporous, which means it won’t absorb water. Unlike natural stone countertops, acrylic countertops do not need to be sealed to prevent staining. They actually repel mold and moisture, making them a great option for the high-humidity environment of the bathroom. When spot damage does occur, it can often be sanded or buffed out.

One drawback to being aware is that acrylic countertops are vulnerable to heat damage. You may wish to avoid setting a hot hair dryer or curling iron on your counter, as the heat could cause discoloration or burn marks.

Great acrylic countertop options: 

Ceramic & Porcelain

ceramic vanity countertop

Though ceramic and porcelain are generally associated with tile, many modern vanities also use a solid ceramic or porcelain top that can bring a touch of elegance to any bathroom. Though ceramic and porcelain are very similar, porcelain uses finer clays that are baked at higher temperatures. This makes them harder and more water-resistant.

The fire glazing process that is used to produce ceramic and porcelain helps them stand up against stains and moisture penetration. They are also available in a wide variety of shades and patterns, including the option to imitate more expensive natural stone variants. However, ceramic is softer than natural stone, which makes it more vulnerable to chipping.

Popular ceramic countertop options:

Composite Stone

Kubebath vanity

Sometimes also referred to as engineered stone or manmade stone, composite stone options include materials like quartz, silicone, and engineered marble. Unlike natural stone, which is quarried and polished, these countertops are made by combining a natural material (such as quartz crystals) with a resin binder to create a durable material in a repeatable design.

With composite stone, what you see is what you get. The variances in patterns that occur in natural stone are not present, so you can be confident that the countertop you order will look exactly like it did in the picture. Of course, this means that composite countertops may end up looking more artificial, which isn’t to everyone’s liking. However, the manufacturing process also enables greater customization. A wider variety of colors, grain densities, countertop thicknesses, and more are available based on manufacturing configurations.

Composite or engineered stone does not need to be sealed, with a composition that makes it resistant to chipping and scratching, as well as spills. However, the cost and durability of these countertops will vary based on how they were manufactured.

Popular composite/engineered stone countertop vanities:

Glass

glass counter

Glass countertops can give your bathroom a stylish contemporary look that works great in the master suite or a guest bathroom. Because glass is recyclable, it is also surprisingly eco-friendly, making it a great choice if you want to reduce the impact your remodeling has on the environment.

Glass is well-suited to the rigors of the bathroom. Glass is durable, and generally won’t experience visible wear or discoloration over time. It is heat resistant and non-porous, so you don’t have to worry about water spills causing stains or a hair dryer damaging the surface. This also makes it harder for bacteria or dirt to get trapped in the countertop. Glass is easily cleaned with soap and water, and various colors and designs are available to help you find the perfect look.

While glass is extremely durable, it isn’t immune to chipping and cracking if hit with a heavy object. Glass is not easy to repair, and significant damage could require that you replace the countertop entirely. Fingerprint smudges will also show up more easily on a glass surface, so it probably isn’t the best choice for a child’s bathroom.

Popular glass countertop vanities:

Granite

Avanity bathroom vanity

Granite countertops offer a distinctive natural beauty that has made them a popular selection in both bathrooms and kitchens. Because granite is quarried in locations across the world, there is a surprising variety of available options in terms of color and design. The grain of the stone is unique, ensuring that each countertop is truly one of a kind.

Granite is a durable material that is very difficult to scratch. It is also heat-resistant. Bathroom vanities with granite countertops frequently use under-mount sinks, which gives the vanity a higher-end appearance that also makes it easier to clean. Spills can be wiped into the sink, and you don’t have to worry about dirt or bacterial accumulation around the edge of a surface mount sink.

One thing to be mindful of with granite countertops is that they do need to be sealed. Granite is porous, which means it will absorb liquids if they are left standing on the countertop for a long time. Sealing is vital to prevent liquid-related stains — especially with lighter-colored granite countertops. Fortunately, modern sealers can easily last 10 years or more, providing resistance against water, chemicals, and other hazards.

Stylish granite countertop vanities:

Marble

Marble is another natural stone countertop option that evokes an incomparable sense of luxury. The gorgeous beauty of marble can completely transform any bathroom, helping give your space a true spa-like atmosphere. As with granite, each marble countertop is truly unique, because the stone was quarried from the earth — not produced in a factory. Black and white may be the most common colors, but other shades and variants are also available.

Of course, that luxury appearance comes at a price. Bathroom vanities with marble countertops tend to be more expensive than other options. Part of this is because marble is much heavier than other materials, which means that the vanity itself needs to be extra sturdy to handle the weight.

Marble also requires additional care and maintenance. Marble is porous and relatively soft compared to other types of natural stone, which means it needs to be sealed for added protection against water stains, scratches, and nicks. Consistent cleaning, polishing, and refinishing are also recommended. Because of this, marble countertops are generally best suited for the low-traffic master bathroom.

Beautiful marble countertop vanities:

Natural Stone

natural stone counter

Though most people think of marble and granite when considering “natural” countertop options, these are far from the only types of natural stone that can be used for a bathroom vanity counter. Materials like slate and soapstone are also commonly used in countertop designs.

Like marble and granite, these natural stone countertops are truly unique, with coloration and veining varying from piece to piece. Soapstone and slate, in particular, are popular choices for bathroom countertops because they are less porous and therefore more stain resistant.

Stylish natural stone countertop vanities:

Resin

Fresca bathroom vanity

Resin countertops are synthetics, typically crafted from cured acrylic or epoxy resin. Cut to order, these countertops can be easily customized to fit the needs of the vanity installation or overall bathroom design. Various pigments and color tints are available for this affordable vanity countertop.

Resin countertops are surprisingly durable and sanitary — in fact, long before they were used in kitchens and bathrooms, they were used in laboratories. Their manufacturing makes them resistant to impact damage, heat, scratches, ultraviolet rays, and stains from acidic products. Resin is non-porous, making it resistant to water penetration and bacterial growth. This also makes it easier to keep clean!

It pays to do your research when considering resin countertops. Generally speaking, countertops made from acrylic and epoxy resins are considered to be more durable and of much higher quality than counters using polyester resin.

Popular resin countertop vanities:

Solid Surface

solid surface countertop

For bathroom vanity counters, the term “solid surface” generally describes resin countertops made from a blend of acrylic and polyester. Solid surface counters are easy to form during manufacturing, which means they are often used in “all in one” designs that integrate the sink basin into the countertop. A wide variety of colors and styles are available, including imitation stone. The manufacturing process also ensures consistent coloring and patterns in the design process.

As with other artificial countertop materials, solid surface counters are quite durable and stain resistant. This makes them well suited to heavy-use areas, such as a child’s bathroom. Solid surface counters can even be repaired through sanding! However, these countertops are vulnerable to heat — such as from a curling iron.

Great solid surface countertop vanities:

Upgrade Your Bathroom Vanity Countertop Today!

No matter what type of countertop you have in mind for your bathroom vanity, you can find exactly what you’re looking for right here at Kitchen & Bath Authority! We offer vanities in a wide range of styles, sizes, and countertop selections, making it easy to discover the right match for your home. We even offer vanities that don’t come with a pre-installed countertop, allowing you to mix and match styles to create your own custom installation.

Best of all, our products are available at significant discounts off MSRP — sometimes as much as 50 percent off! We know that the cost of bathroom remodeling can add up quickly, especially if you are working with contractors. By offering discounted prices on vanity countertops and other products, we help you stretch your budget further so you can get that much closer to creating your dream bathroom.

If you sign up for our exclusive membership program, you can unlock even more discounts on products throughout our online store. Place your order today so you can start transforming your bathroom for the better!

Purchasing a Bathroom Vanity? Consider These Crucial Factors

In many ways, bathroom vanities serve as the centerpiece to any bathroom. As one of the most visible elements of the room, the vanity will go a long way in helping you establish the preferred style and aesthetic for your remodeling project. Depending on your selection, the vanity could anchor the rest of the elements of your bathroom — or it could stand out like a sore thumb.

With so many bathroom vanity styles to choose from, it can sometimes be hard to determine which option will be the best pick for your needs. To get the best in terms of both style and functionality, there are a few important elements that every homeowner should consider.

Know How the Floor Plan Fits Your Bathroom Vanity

house floor plan

When first planning for a new bathroom vanity, you should make the floor plan of your bathroom a top consideration — particularly in how it relates to the location of your current vanity. Generally speaking, the easiest and least expensive option for remodeling is to purchase a new vanity that shares the same dimensions as the old one and will go in the exact same location.

When you purchase a vanity that matches the dimensions of the old unit, you won’t have to worry about it being too large and impeding your walking lanes or having drawers that bump into walls. It also becomes much easier to hook up the new plumbing connections.

This allows you to do what is essentially a “surface remodel.” In such situations, many homeowners with moderate DIY skills can handle the removal of the old vanity and the installation of a new one without enlisting the help of a contractor.

Of course, the current floor plan may not always be conducive to your overall goals for the bathroom. In this case, changing the location of the vanity may be needed to help fulfill your overall vision. Be mindful of the additional costs and additional remodeling time that may be associated with these larger-scale changes, especially in regards to installing new plumbing pipes. 

If you are going for a full-scale remodel that even includes knocking down walls to enlarge the size of the bathroom, you are practically unlimited in terms of what size of vanity you can get. Work with a designer to find an option that will feel appropriately sized for the newly renovated space.

Traditional, Transitional, or Contemporary?

bathroom vanity

The style of vanity that you select will go a long way in establishing the overall feel of your bathroom. While there are many options to choose from, homeowners should start by considering the general style they prefer for their bathroom — traditional, transitional, or contemporary.

Traditional bathroom vanities offer a cabinet-style design that is often evocative of farmhouse or old-world European styles. These free-standing vanities look more like a piece of furniture, and can help create an elegant, distinguished look. They also typically feature more intricately carved moulding, such as you would find in the Chans Furniture 6275M Brookdale 45 Inch Brown Bathroom Sink Vanity.

Modern or contemporary vanities, on the other hand, offer a sleek, minimalist appearance. Many use materials other than wood, such as glass or stainless steel, to help these designs stand out even more. Wall-mounted vanities are quite common, giving the bathroom a more open, airy feel. You won’t find intricately carved moulding, but instead smooth, flat surfaces like in the KubeBath BSL60D-NW Bliss 60 Inch Double Sink Nature Wood Wall Mount Modern Bathroom Vanity.

Transitional vanities find a kind of middle ground between traditional and contemporary styles. Some transitional pieces, like the Ariel M085D-ESP Stafford 85 Inch Double Sink Vanity Set With Center Medicine Cabinet lean more toward a traditional look. Others, like the Water-Creation VEL024CWMB00 Elizabeth 24 Inch Single Sink Carrara White Marble Vanity in Monarch Blue, trend closer to a modern aesthetic.

Make sure that other features that are added as part of your remodel match this aesthetic. You don’t want to get a contemporary vanity if it will clash with your antique-style tub! It can also be helpful to consider your decor throughout the house. Maintaining the same general “style” in the bathroom as is used in the kitchen or living room will help create a unified, cohesive feel.

Choose Bathroom Vanity Colors Carefully

blue bathroom vanity

Beyond the general theme and design of your bathroom vanity, you must also consider the color that would be the best fit for your bathroom. While contemporary and transitional vanities tend to offer a wider variety of colors than traditional models, the color you choose is still important regardless of style.

Generally speaking, traditional vanities are available in darker, natural colors, though some are also available in colors like white, gray, or blue. With contemporary vanities, you could even get brighter options like orange, red, or yellow. You’ll also find alternative finish options, such as a glass or mirrored finish.

These colors are more than just a reflection of your personal tastes — they also influence the feel of the entire bathroom. Dark colors tend to evoke a more reflective or introspective feeling. They can also make a room feel somewhat smaller. Light colors can help a room feel larger and potentially even more inviting.

Because of this, if you are remodeling a smaller bathroom, a dark brown or black vanity could cause the room to feel tight and claustrophobic, particularly if you have dark-colored walls. On the other hand, if a similar vanity were placed in a large bathroom, it could provide a helpful anchoring effect.

You should use the color of your vanity to help determine other color selections, such as the walls or flooring. This will make it easier to create the desired level of cohesiveness or contrast in your material selections so you can create the right ambiance for the bathroom.

How Many Sinks?

double sink vanity

The number of sinks offered by a bathroom vanity is one of its most important functional elements. While a single sink may be fine in the guest bathroom, a double sink unit is typically much more convenient for a master suite where both spouses get ready for the day at the same time.

Of course, if your current bathroom vanity only has one sink and you’d like to add a model with two sinks, some additional plumbing work will be required. However, this will be worth the extra investment if it helps streamline your morning routine!

Even if you have a smaller master bathroom, this doesn’t mean that you can’t install a double-sink vanity. Vanities like the Vinnova 755049-GR-WH-NM Pavia 48 Inch Single Vanity in Grey With Acrylic Undercount Sink also offer the option for installing two faucets. However, this is generally considered the smallest vanity length for two faucets. You should also keep in mind that a double sink will reduce how much countertop space is available.

When determining whether to get a single or double faucet vanity, it is also important to remember that many vanities do not come with a faucet pre-installed. You will need to pick a faucet that matches the pre-drilled holes in the vanity countertop, whether that be a single-hole faucet or widespread mount.

In addition to selecting a faucet style that matches your vanity, you may also wish to consider installing low-flow faucets. These faucets help reduce your household water consumption, which will lower your utility bills and your impact on the environment.

Don’t Overlook Storage Needs

vanity with open drawers

A wall-mounted vanity may provide a sleek, modern look for your bathroom, but will it provide enough space for storing extra towels, toiletries, and other bathroom supplies? Understanding your bathroom storage needs should also play a key role in your vanity selection.

The overall dimensions of the bathroom vanity don’t necessarily define whether it will meet your storage needs. Pay attention to the number of drawers and doors that a vanity has. This can make it easier or harder to organize everything, and will likely determine whether or not you can fit everything you need into a single vanity unit.

If you require additional storage space, you may want to purchase a bathroom vanity that includes a matching side cabinet, which will ensure that you have enough room for all your supplies. As with installing a vanity itself, make sure that the addition of a side cabinet does not encroach upon walkways or cause the bathroom to feel cramped and crowded.

Generally speaking, you will need the most storage space in a master bedroom. Guest bathrooms will require some storage, but not nearly as much as in a master suite, which could make a wall-mounted vanity with less storage space more feasible. A hallway half-bath may not require any storage whatsoever, especially if it is located near a linen closet where you can store additional bathroom products.

Matching With Mirrors and Medicine Cabinets

pedestal vanity and medicine cabinet

Once you’ve selected your preferred style of bathroom vanity, the next step is to find a mirror or medicine cabinet to go with it. Some vanities actually include a matching mirror or medicine cabinet. Examples include the Belmont Decor HAMP055SRECGRY Hampton 55 Inch Single Rectangle Sink Vanity Set or the Fresca FVN5024WH Quadro 22.5 Inch White Pedestal Sink With Medicine Cabinet.

Even for bathroom vanities that don’t come with a mirror or medicine cabinet, many manufacturers produce several models that would serve as an appealing match to the vanity unit. 

But which option is best for your needs? The answer will be largely dependent on what you currently have in your bathroom, as well as how much storage may be needed.

For example, a pedestal vanity works great for small bathrooms, but doesn’t provide much storage space. Because of this, a medicine cabinet will typically be the best option for bathrooms that are used for morning or night-time preparations. However, if you were installing a pedestal vanity in a hallway half-bath, you could likely get by with a mirror, since these bathrooms are typically only used for convenience during the day or when hosting visitors.

With larger vanities, a single medicine cabinet could easily look dwarfed and undersized in comparison to the vanity itself. While you can gang multiple medicine cabinets together, it is often easier to simply place a larger mirror above the vanity — especially if the vanity already provides plenty of storage space.

Some medicine cabinets offer exciting additional features, such as a glass defogger or a night light, which can help improve your bathroom’s functionality, even if you don’t need much extra storage space. However, you should be aware of additional electrical wiring work that may be needed, as well as the extra labor that goes into installing a recessed medicine cabinet.

Making the Right Bathroom Vanity Selection

When you carefully consider these factors before you start shopping for a new bathroom vanity, you will have a much easier time narrowing down your search. Determining which features are the most essential will also help you make a purchase that you will be satisfied with in the long run.

Here at Kitchen & Bath Authority, we understand that price is frequently an important factor when buying a bathroom vanity. We don’t want you to have to settle for a vanity that doesn’t live up to your expectations simply because of the price!

That’s why we offer thousands of vanities from top brands like Ancerre Designs, Fresca, and KubeBath — all at significant discounts off MSRP. With some vanities, you can literally save thousands of dollars on your purchase thanks to our discounted prices.

This isn’t the only way you can save. If you sign up for our membership program, you get access to additional discounts through our exclusive members pricing. We also offer free shipping on all purchases.

By ensuring that you don’t break the bank when you buy a vanity, you will be better positioned to stretch your budget for the rest of your bathroom remodeling to-do’s. With a new vanity from Kitchen & Bath Authority, you will be able to truly create the bathroom of your dreams, at a price you can afford.

Bring Luxury to Your Bathroom With Ancerre Designs

While the abundance of bathroom vanity brands can make it hard to narrow down your purchasing decision, there are some manufacturers whose processes and designs help them stand out from the rest — and few brands can compare to Ancerre Designs.

When it comes to giving your bathroom a truly luxurious feel, the right bathroom vanity makes all the difference. But how can you be certain that you are getting a vanity that will perfectly meet your needs in the years to come? For most homeowners, two of the most important attributes are the style and build quality of the vanity — and this is where Ancerre Designs delivers.

So what is it that makes this handcrafted bathroom furniture stand out from the competition? Here’s a closer look at what makes these vanities an ideal choice for creating a luxurious bathroom experience.

The Right Background

Ancerre Designs

For Ancerre Designs, achieving quality results with each bathroom vanity stems from a passion for woodworking and design. The brand’s owner, Quinn H., has over 19 years of experience in the kitchen and bath industry. A love for woodworking was first cultivated in high school in San Diego, where Quinn built his first grandfather clock while still in school. Coupled with part-time work shaping skateboard decks and massage tables, these experiences gave him an early appreciation for the hard work that is required to achieve quality craftsmanship and design.

Since then, he took his talents to kitchen and bath showrooms, working closely with designers, builders, and customers to better understand what differentiated the extraordinary bathroom vanity designs from the average.

Quinn utilized this wide array of experiences and a passion for woodworking to found Ancerre Designs. Today, the company offers nearly 200 bathroom vanity options, and Quinn remains closely involved in all facets of the work. From product design and development to packaging design, photoshoots, and more, this hands-on approach ensures the highest-quality outcomes for each new bathroom vanity produced by this company.

Even as the company’s scope has grown, this continuing commitment to personalized, hands-on craftsmanship allows Ancerre Designs to keep producing industry-leading vanities.

The Right Process

A passion for quality woodworking naturally lends itself to a desire to achieve amazing results that will stand the test of time. But as with any other product, a bathroom vanity will only deliver great results year after year if it is built with quality craftsmanship.

For Ancerre Designs, this starts by selecting the right materials to work with. Their artisan craftsmen personally visit a favorite local lumber mill, where they hand-select the wood that will be used to build each bathroom vanity. All wood that is purchased must meet the company’s strict criteria to ensure the highest performance possible.

For the box construction used to build bathroom vanities, Ancerre Designs uses both solid wood and thick plywood, specifically avoiding the particle wood and medium density fiber wood that are frequently used by other manufacturers. 

By using higher-quality woods, the craftsmen ensure that the vanities have better moisture resistance, making them ideally suited for the wet and humid conditions of the average bathroom. These same design standards also apply to the vanity doors and drawers, where only solid wood and hardwood are used to ensure greater quality and durability. This helps to eliminate common design hazards, such as the risk for mold or mildew growth.

Another area where the brand stands out from the rest is in its painting and finishing process. Most mass-produced bathroom vanities are finished with a nitrocellulose lacquer paint (or NC paint) so that the manufacturers can finish each piece in only one or two days. While this greatly speeds up the manufacturing process, the paint’s lack of depth makes it more vulnerable to scratches, cracks, and even changing color. Cutting corners may save money upfront, but it will only cause problems later on.

At Ancerre Designs, on the other hand, a far more laborious painting process is used to ensure that each finish has the depth and richness to deliver lasting beauty. For starters, they use polyurethane finish paint (or PU paint), which offers superior resistance to water, UV light, and impact damage. This provides greater protection against wear and tear to help the vanity maintain its great looks for years to come. The use of a satin smooth matte finish also keeps the vanities from looking too shiny when exposed to light, achieving the right balance for a more elegant appearance.

The paint application process also makes a difference. A multi-step finishing process means that it can take several days — or even weeks — to finish a vanity. At Ancerre Designs, after a coat of PU paint is applied, it is given time to fully dry before it is sanded. Then, another coat of paint is applied. The process is repeated several times to ensure a rich, highly detailed look for the vanity that won’t diminish with time.

Superior design and manufacturing processes means that the company stands behind its work. As a result, each vanity comes with a three-year limited warranty, as opposed to the one-year warranty typically offered by other manufacturers.

The Extra Details

Audrey drawer

Sometimes, the smallest details can make the biggest difference — and many of the seemingly minor additions to these bathroom vanities will go a long way in helping you get the most out of your furniture piece. 

The door and drawer design of the vanities is a perfect example of this. In addition to utilizing high-quality wood, Ancerre Designs’ craftsmen incorporate key design elements to ensure a user-friendly experience. For example, each of their bathroom vanities uses soft-closing hardware to keep doors and drawers from slamming shut. The soft-close hardware is actually concealed underneath the drawers to help maximize the width, and has been tested for over one million uses, so you can have confidence it will continue to perform like it should, even after several years.

Another drawer design improvement is the implementation of traditional dovetailed drawer boxes. As with other design choices, this requires more work on the part of the manufacturer, but results in better outcomes for the buyer. These drawers use a series of interlocking joints cut into the wood to create the box. This creates a far stronger bond than is possible with the use of staples or dowels, and also allows for wider interior space. This essentially eliminates the risk of having the drawers break apart along the joints — a common design flaw in other vanities.

Drawers aren’t the only area where small design tweaks can improve the overall experience. Ancerre Designs vanities also account for the reality that most bathroom floors are not entirely level. With other vanities, you might place a freestanding piece in your bathroom, only to discover that one leg doesn’t rest perfectly on the floor. As a result, you would have to place a shim under the leg or find some other troubleshooting solution to make the vanity level.

With Ancerre Designs, this isn’t a problem. Each bathroom vanity comes equipped with a series of adjustable leg levelers. Easy to use, these levelers allow you to quickly make any changes that might be necessary to create a flat, stable surface for your bathroom vanity.

Checking Out Some of Ancerre Designs’ Most Popular Product Lines!

Catherine Collection

Whether you prefer a contemporary look or a more traditional design, Ancerre Designs has a vanity option that is right for you. Here is a closer look at some of the brand’s most popular product lines:

In addition to the vanities themselves, Ancerre Designs also produces matching mirrors, allowing you to complete the look of your bathroom with another high-quality product. Be aware that Ancerre Designs bathroom vanities do not include a faucet. However, Kitchen & Bath Authority offers a wide variety of bathroom faucets to help you find the right match for your preferred vanity. Some vanities are also sold without a countertop, giving you the freedom to choose your preferred style from the brand of your choice.

Caring For Your Ancerre Designs Vanity

Though Ancerre Designs bathroom vanities are built with lasting durability in mind, providing appropriate care and maintenance will further ensure that your vanity will continue to look and perform its best in the years ahead.

Thankfully, you don’t need to invest in expensive cleaning products to take care of your new vanity — in fact, the simplest solutions will generally offer the best results. For the wood portion of your vanity, dust regularly with a soft cotton cloth. If more intensive cleaning is needed, simply use a damp towel with warm water to wipe away spills. Be sure to use a non-abrasive towel for both cleaning and drying.

You can also protect the vanity’s wood by installing it in an area out of direct sunlight and away from heating vents. Excess exposure to heat can cause the finish to fade and even shrink or crack the wood. Even something as simple as closing the shades (if your bathroom has windows) will protect the vanity wood from such damage.

Natural stone and quartz countertops similarly should only be cleaned with a slightly damp, non-abrasive cloth, and then dried with a soft towel. The use of bleach or other abrasive cleaners is actually strongly discouraged, as this can etch or dull the counter surface. Using these cleaners will also void your warranty. Applying a stone sealant to non-quartz natural stone surfaces on an annual basis will also help prevent staining.

Aside from these basic steps, be sure to wipe up any standing water on these surfaces, rather than letting it sit and air dry. Following these easy care guidelines as part of your bathroom cleaning routine will keep your Ancerre Designs vanity looking its best for years to come.

Parting Thoughts

The right bathroom vanity can transform an ordinary bathroom into a truly luxurious spa. With Ancerre Designs, you get beautifully handcrafted vanities that are built with both style and functionality in mind. The gorgeous design blends perfectly with traditional manufacturing principles to ensure that you will get more out of your bathroom than ever before.

Of course, upgrading your bathroom with a brand new vanity isn’t cheap, especially if you are planning a full bathroom renovation. That’s where Kitchen & Bath Authority is ready to help. We offer bathroom vanities from Ancerre Designs for as much as 39 percent off the standard retail pricing. Members can access additional exclusive savings and promotions — and right now, you can enroll in a trial membership for free to start saving even more on your first purchase.

Even if you don’t become a member, we still offer plenty of other ways to save. Free shipping helps keep your costs down, and access to exclusive deals and promotions, expedited order processing, and other perks are a great way to get everything you need for renovating your bathroom.

Don’t let your dream bathroom remain as nothing more than a dream. Let us help you get your favorite Ancerre Designs vanity today so you can transform your bathroom.

3 Great Bathroom Product Lines to Complete Your Design

When it comes to completing a bathroom redesign, you shouldn’t have to choose between style or functionality. With the right bathroom products, you will get a perfect combination of both attributes. You will have a stylish bathroom that complements the rest of your home decor, while also enjoying the functionality needed to make using the bathroom a true pleasure.

It should hardly come as a surprise, then, that getting great results for your bathroom starts with selecting the right bathroom products. With a bathroom vanity from Chans Furniture or Water Creation, paired with exciting accessories from the Amba Products line, you will have no trouble creating the bathroom of your dreams.

Here is a closer look at just some of what each of these brands has to offer.

Chans Furniture

First established in 1989, Chans Furniture is based out of South Florida and primarily specializes in bathroom vanities and mirrors. Their free-standing bathroom vanities are available in both traditional and contemporary styles, making it easy to find a design that best suits your preferences and available bathroom space.

If you are looking for a traditional bathroom vanity, the Chans Furniture CF-2873W-AW Fiesta 32 Inch Antique White Bathroom Sink Vanity is a great option. The simple carvings of the trim perfectly complement the more intricate design of the moulding to create an antique look. This vanity comes with a white marble countertop with pre-drilled holes for you to install the faucet of your choice. An optional matching mirror and back splash are also available, featuring the same antique design so you can enjoy consistent style.

Another great example of Chans Furniture’s eye for the traditional is the Chans Furniture CF-28885BU Abbeville 46 Inch Distressed Blue Bathroom Sink Vanity. This cottage-style vanity features a shutter-style door that makes it perfectly suited for a beach house or any other home where you want to create a relaxed, laid-back feel. The distressed antique blue finish is especially distinct, though a more subdued beige model is also available.

Of course, if you prefer a bathroom vanity with a more modern flair, Chans Furniture has plenty of options for you, too. The Chans Furniture 7332Q60 60 Inch All-Mirrored Reflection Ashlia Double Sink Bathroom Sink Vanity is a true statement piece. The mirrored finish is comprised of high-quality beveled glass mirrors, which pair perfectly with the Italian Carrera marble counter. The silver base allows the non-mirrored surfaces to blend seamlessly with this unique reflective design.

Modern Chans Furniture vanities are also available with traditional materials. The Chans Furniture Q136-8X Verdana 48 Inch Medium Brown Bathroom Vessel Sink Vanity is made from wood, but utilizes a distinctly modern design. The glass bowl sink uses a faux wood pattern finish to match the vanity construction, while the mounted marble countertop features a honey coloration that pairs perfectly with the vanity’s medium brown finish. The end result is sleek modern elegance that complements a wide range of decor styles. The faucet is included for this piece, making installation even easier.

Regardless of which Chans Furniture product you choose, you can have confidence that it will help you enjoy a low-stress installation. Each vanity comes with a pre-cut back opening for easy access to plumbing, ensuring fast and efficient hookups. With so many styles and sizes to choose from — even corner vanities — you will have no trouble finding the right match for your bathroom.

Water Creation

Water Creation is another popular bathroom vanity brand with a wide range of distinctive free-standing products. In fact, here at Kitchen & Bath Authority, we carry over 500 Water Creation bathroom vanities! Each Water Creation vanity is backed by a one-year limited warranty, and the brand’s faucets come with a lifetime limited warranty. With proper care and maintenance, you can have confidence that their vanities will last a lifetime and that you won’t have to worry about leaks or other design flaws.

As with Chans Furniture, Water Creation offers a wide range of traditional, transitional, and contemporary bathroom vanities. One of their most popular selections is the Water Creation VEL060CWMB00 Elizabeth 60 Inch Double Sink Carrara White Marble Vanity in Monarch Blue. This transitional piece combines solid hardwood and natural marble in a simple yet elegant shaker style design. Soft closing doors and drawers and elegant handles make this vanity a joy to use. Best of all, it comes with two matching mirrors to further complete the look of your bathroom.

Options for even larger bathrooms are available as well, such as the Water Creation Derby72G Derby 72 Inch Cashmere Grey Double Sink Bathroom Vanity. Tempered glass knobs and pulls bring a traditional touch to this transitional piece, which features spacious interior shelves, four functional drawers, and four large doors. The simple inset-panel design of the drawers and doors strikes the perfect balance between traditional and contemporary styles.

Of course, Water Creation vanities are available in much smaller sizes — and in a more traditional design. A great example of this is the Water Creation Greenwich24G Greenwich 24 Inch Grey Single Sink Bathroom Vanity. This compact vanity is perfect for the guest bathroom, but it is still constructed from solid hardwood to ensure enduring quality. The solid brass and cremone bolt hardware provides a unique, antique-style handle for opening the lower doors.

For a contemporary twist on these smaller vanities, you can check out options like the Water Creation Madalyn24E Madalyn 24 Inch Espresso Single Sink Bathroom Vanity. A functional lower drawer paired with open shelving ensures plenty of functionality from this streamlined, modern bathroom vanity. The vanity’s hardware features a chrome finish that offers pleasing contrast against the dark finish of the wood.

Regardless of the style or size that you choose to purchase from Water Creations, you can have confidence that your bathroom vanity will stand the test of time. Water Creations bathroom products are made with kiln-dried hardwood. This prevents the wood from warping or contracting over time, even with continuous exposure to the humid conditions of the bathroom. Similarly, the vanities’ stone countertops are factory-sealed to prevent watermarks and stains. With proper care, your bathroom vanity will look just as good 10 or even 20 years from now as it did the day you bought it.

Amba Products

bathroom products: Amba Products heated towel rack

There is much more to creating a gorgeous, functional bathroom than the vanity. Other products can also play a major role in helping you design a dream bathroom, and this is where Amba Products comes in. Founded in 2004 and based out of Atlanta, Georgia, this company produces several bathroom accessories to create a luxury feel for your bathroom — but none receive greater emphasis than their heated towel racks.

Heated towel racks are a common feature in European bathrooms, but they are still relatively new to the United States. Heated towel racks are a surefire way to improve the overall bathroom experience while introducing a sense of luxury that you would normally associate with a five-star hotel. Their award-winning Italian designs are sure to help you take your bathroom experience to the next level.

Products like the Amba Products RSWH-B Radiant 24 W X 32 H Inch Square Hardwired Heated Towel Rack are wired directly to your home’s power system and use an integrated on/off switch. Its stainless steel finish can reach temperatures of 141 to 150 degrees Fahrenheit. The addition of a programmable timer can give you even more control over the towel rack’s heating function. 

If you prefer a smaller, more versatile design, the Amba Products J-B0003 B Swivel Jill 25 W X 29 H Inch Plug-In Heated Towel Rack is an ideal solution. The towel rack’s bars can rotate a full 180 degrees, with each bar rotating independently of the others. As a plug-in model, it is also easier to install.

More advanced models are also available, such as the Amba Products KSB-30 Jeeves K 29-1/2 W X 27 H Inch Straight Heated Towel Rack. With 10 straight horizontal bars, this bathroom product has plenty of space for bath towels and hand towels. This model is also compatible with several add-on features for extra functionality, including bathrobe hangers and shelf bars.

The use of a liquid-filled or wire cable warming system allows Amba Products heated towel racks to dry and warm towels in bathrooms, kitchens, laundry rooms, and more. Rapid drying ensures that your towels won’t develop a musty or moldy smell — a common issue when you leave your towels to air dry. This innovative drying system prevents mildew buildup so that you won’t have to worry about washing towels as frequently. The towel racks themselves are also quite eco-friendly, requiring minimal power to provide heat.

The radiator-style heating system also provides additional heat to the entire bathroom, which can help reduce ambient humidity and maintain warm temperatures during the winter months. UL and ETL safety approvals ensure that the towel racks will provide worry-free function at all times. Better still, a wall-mounted design ensures that they won’t take up much more space than a standard towel rack.

Building the Dream Bathroom With the Right Bathroom Products

bathroom products

When planning for your bathroom redesign, you will need to take the available space and current layout of your bathroom into consideration, as well as how you plan on using the room on a daily basis. You should also decide which style you prefer for your bathroom decor. The better you understand these factors, the easier it will be to choose the right bathroom products for your needs.

Take careful measurements when planning for the installation of a new bathroom vanity. In most cases, it is best to use the size of your current vanity as a guideline. This can facilitate the installation process by ensuring that doors and drawers don’t bump into adjacent features, while also making it easier to match up the plumbing.

In the United States, most homeowners don’t already have a heated towel rack in their bathroom. For these completely new installations (which tend to be a bit larger than standard towel racks), double check measurements for width, height, and depth on product listings. Use a tape measure to help you visualize how much space these items would actually take up in your bathroom. As valuable as certain bathroom products may be, you don’t want to get something that is so large that it makes the bathroom feel cramped or difficult to navigate.

It also pays to only install bathroom products that make sense for how the room will be used. While heated towel racks are an ideal solution for the master bathroom, they may not be necessary in a guest bathroom that is rarely used.

Finally, be mindful of the overall aesthetic you wish to achieve for your bathroom. You should account for both the design style and the colors of your vanities and other bathroom products. While certain styles, like a stainless steel towel rack, can go with most any type of decor, other colors or styles can clash. Of course, you shouldn’t be afraid to replace outdated shower curtains or bath mats if necessary to achieve a better match with your new vanity.

Generally speaking, it’s best to make the vanity the starting point of your overall bathroom design when planning a total remodel. This way, other bathroom features will complement its appearance. If you are only replacing the vanity, consider how it will pair with other design elements, such as a medicine cabinet or shower. Crafting a consistent style will ensure a result that you will be satisfied with in the long run.

Parting Thoughts

No matter which bathroom products seem like they will be the best fit for your home, you can have confidence when you buy from Kitchen & Bath Authority! We offer high-quality bathroom products from Chans Furniture, Water Creation, Amba Products, and more, with many items available at significant discounts off MSRP. Each product line has been thoroughly vetted by our staff to make sure that we only sell the type of products that we would be happy to use in our own homes.

Combined with free shipping, no sales tax, generous financing that will break your purchase into affordable monthly payments, and great customer service, you can have confidence when you buy from our store. Our friendly staff is readily available to answer your questions to help you find the right products to complete your bathroom.

Check back often for more special deals and promotions! With a great selection and affordable prices, the bathroom of your dreams is closer than you might think.

Check Out Some of Our Top Brands For Bathroom Vanities!

Recently, we discussed how recent tariffs that are being imposed against China could soon force manufacturers to raise prices on bathroom vanities and other related products. Because of this, homeowners planning a bathroom renovation — or even a relatively minor upgrade — should make their purchases now, rather than wait and let themselves get hit by more expensive prices in the near future.

As part of that article, we also highlighted some of our top bathroom vanity brands: Stufurhome, Bosconi, and KubeBath. But these three brands are only the tip of the iceberg in terms of the product selection we offer at Kitchen & Bath Authority!

With over 40 bathroom vanity brands available, you will have no trouble finding a model that meets your design preferences and budget. Here is a closer look at some of our most popular brands and why they are worth checking out.

Fresca Bathroom Vanities

For those wishing to bring a contemporary look to their bathroom, few brands can compete with Fresca. Offering a great variety of both free-standing and wall-mounted bathroom vanities, Fresca products make use of a unique mix of materials and designs to help you cultivate a modern look.

For example, the Fresca FVN3318ES Contento 48 Inch Espresso Modern Bathroom Vanity With Mirror features a tempered glass basin and countertop mounted above a solid wood frame cabinet with three soft close doors. This distinctive design also provides convenient cubby hole storage underneath the countertop. The slight octagonal shape of the vanity also provides more storage space than a traditional rectangular cabinet.

The Fresca FVN1019 Ovale 24 Inch Modern Glass Bathroom Vanity W/Frosted Edge Mirror also features a clear glass basin, but further adds to its chic design with a jewel tone chrome stand. A stainless steel finish provides an undeniably contemporary look to this pedestal-style vanity that is ideally suited for a half-bath. 

The approach to contemporary style isn’t merely limited to material selection and design — with Fresca, you can also give your bathroom vanity a bold splash of color. The Fresca FVN5092OR Energia 36 Inch Orange Modern Bathroom Vanity With Three Panel Folding Mirror uses a bright orange color on both the vanity and mirror to make its simple design stand out. Select cabinets are also available in red or yellow to give your bathroom a distinctive character that helps showcase your personality and penchant for unique decor.

Of course, your contemporary bathroom vanity doesn’t have to make such a bold statement. Pieces like the Fresca FB9148RW-I Tuscany 48 Inch Rosewood Free Standing Modern Bathroom Cabinet With Integrated Sink pair a simple contemporary design with a natural-looking Rosewood finish. The result is a minimalist bathroom vanity that won’t look out of place alongside other wood pieces.

Other more natural bathroom vanity options include the Fresca FVN62-361236LO-VSL Torino 83.5 Inch Light Oak Modern Double Sink Bathroom Vanity W/Side Cabinet & Vessel Sinks, which features a light-toned oak finish to balance out frosted glass door panels and ceramic sink bowls. The combination of modern design elements and a traditional finish make it a great fit for many bathrooms.

When purchasing a Fresca bathroom vanity, you aren’t limited to a single pre-determined faucet. Several vanity faucet selections are available for each model, allowing you to more fully customize your new installation to achieve the exact desired look and functionality for your unit.

Robern Bathroom Vanities

Robern is another popular contemporary bathroom vanity brand that continues to innovate in ways that improve the look of the entire bathroom. Robern was founded in 1968 with an emphasis on cabinetry. As the brand has grown and evolved over time, its offerings grew to include modular cabinet and lighting solutions, and finally in 2010, its own line of bathroom vanities.

With so many decades of industry experience, continued innovation has come easy to the design of its products — including bathroom vanities. Even more importantly, this experience ensures that Robern’s manufacturers understand which design features will have the greatest impact for style, functionality, and durability.

Robern’s emphasis on modular design allows homeowners to create a custom, one of a kind bathroom vanity installation. For example, the Robern VM12H1D21F10L Cartesian 12 W x 7-1/2 H x 21 3/4 D Inch Slim Vanity Side Unit With Full Drawer And Night Light can be ganged or stacked with other units to create a full-size vanity that perfectly fits your space. Options such as slim drawer inserts or a full drawer insert with glass bins allows for even greater storage customization. 

By determining the dimensions of the vanity that you need and evaluating your own bathroom storage needs, you can mix and match modular vanity pieces for the perfect result. Better still, many Robern vanity units come with a built-in night light that will make it easier to navigate the bathroom or use the vanity at night.

Of course, you don’t have to design your own bathroom vanity from the ground up to experience the many benefits of Robern products. Pre-manufactured single sink vanities are also available to make it easier to give your bathroom a modern touch. However, these pieces still offer some level of customization to ensure you don’t get a cookie-cutter look.

For example, the Robern 30119400TB00003 Cartesian 30 Inch Three Drawer Decorative Glass Vanity In Tinted Gray Mirror With Engineered Stone Vanity Top In Silestone Lyra and Night Light pairs high-quality glass finishes with gorgeous engineered stone to create a durable, yet gorgeous vanity. Buyers can customize their piece by choosing from three sizes and color combinations, as well as optional add-on features like an LED night light or in-drawer electrical outlets.

This same level of customization is also found in products like the Robern VB42H2D21P10N71 Balletto 42 W x 15 H Inch Single Drawer Vanity With Plumbing Drawer. All buyers will enjoy the stiletto-style chrome legs and minimalist contemporary design with hidden side storage areas. However, the vanity can be further customized with add-on features like a hidden literature side storage insert, hidden cotton side storage insert, or in-drawer electrical outlets. Thirteen color/finish options allow you to choose the style that will best match your current decor — or help set the bathroom vanity apart as the room’s visual centerpiece.

With Robern bathroom vanities, you get much more than a sleek, contemporary style. You ultimately have the opportunity to fully customize your installation to create a one of a kind look that will stand apart from everyone else.

James Martin Bathroom Vanities

If you’re interested in a more traditional design, a James Martin bathroom vanity is the perfect choice. With over 17 years in business, the managers and owners of James Martin utilize over 120 years of combined industry experience to bring traditional elegance to modern bathroom vanities.

Each of the 20 bathroom vanity series available from James Martin includes several different models and sizes to help homeowners and even hotels find the perfect traditional look. Their handcrafted products are made with carefully selected North American hardwoods, resulting in gorgeous and unique cabinets that are built to stand the test of time.

Because each James Martin bathroom vanity is handcrafted, the final products are truly distinct from one another. For example, though two versions of the James Martin 147-114-5681 Brookfield 60 Inch Double Cabinet, Warm Cherry would look similar to one another, the human touch applied during manufacturing would give each one subtle differences that help them stand apart.

This same level of uniqueness also applies to James Martin countertops. Available countertop surfaces like marble and granite are quarried from natural stone, giving each countertop its own distinctive colors and veining. If you prefer a more uniform look, quartz and easy to maintain solid surface acrylics are also available.

Many James Martin product lines combine both traditional and contemporary design elements to create a truly timeless piece. For example, the James Martin 650-V60D-BNM-2GLB Brittany 60 Inch Burnished Mahogany Double Vanity With 2cm Galala Beige Marble Stone Top features less ornamentation than most traditional designs, but utilizes tapered legs and other subtle traditional design elements to craft a transitional look.

Other bathroom vanity models fully embrace a traditional appearance. The James Martin 150-V48-ANW Balmoral 48 Inch Single Vanity Cabinet, Antique Walnut uses traditional design elements like square paw feet and intricately carved doors and a matching backsplash. The James Martin 238-104-V26-DRF Savannah 26 Inch Single Vanity Cabinet, Driftwood is perfectly suited for a beach house or cabin getaway with its rustic shutter-style design and driftwood finish.

Despite their traditional design, James Martin bathroom vanities incorporate modern design practices to ensure even better results. Premium finishes ensure moisture and UV resistance, while the use of Grade A hardwood further improves durability. Each bathroom vanity is backed by a 1-year manufacturer’s warranty to protect you from any defects with the material or workmanship.

Conclusion

Whether you prefer the contemporary look of Fresca and Robern or the traditional elegance of James Martin, you’ll have no trouble finding the right bathroom vanity for your home here at Kitchen & Bath Authority. 

Perhaps even more importantly, you will be able to find the vanity you want at a price you can afford. We offer generous discounts off MSRP on bathroom vanities and other kitchen and bath products, with typical savings of over 30 percent. Additional promo codes can help you save as much as an additional 20 percent on your order. We also offer free shipping and no sales tax on all purchases.

If you still don’t like the price you see, feel free to make us an offer. Simply tell us the price you are willing to pay for the bathroom vanity in question. You will get an instant response either accepting or rejecting your offer. You never know what kind of deal you might get!

Once you’ve found an option that seems like an ideal match for your dream bathroom, don’t wait to order your bathroom vanity. While no one can predict the market with foolproof accuracy, current trends indicate that prices will likely be going up for the foreseeable future. Make your purchase now so you can save big later.