Drolet DB03111 Escape 1800 25 5/8 Inch Free Standing Wood Stove with Brushed Nickel Door
Similar Products
Product details
Installation Type | Free-Standing | ||
Fuel Type | Wood | ||
Style | Transitional | ||
Finish | Blacks / Nickel Tones | ||
Material | Ceramic / Glass / Iron / Steel | ||
Collection | Escape | ||
Width | 25.63 | ||
Height | 32.63 | ||
Depth | 25.75 | ||
|
Drolet DB03111 Escape 1800 25 5/8 Inch Free Standing Wood Stove with Brushed Nickel Door
Ideal for spaces up to 2,100 ft², this large non-catalytic wood stove produces up to 75,000 BTU/h and emits only 1.54 g/h of fine particles. The unit is equipped with side panels that reduce clearances to combustible materials, and a top heat exchanger that redirects heat to the front of the unit.
Features:
- Up to 8 hours burn time
- Heavy duty 3/8 Inch steel top
- Proudly made in Canada
- Certified for Mobile Home and alcove installation
- Average Particulate Emissions Rate: This appliance is officially tested and certified by an independent agency
- Values are as measured per test method, except for the Recommended Heating Area, firebox volume, Maximum Burn Time and maximum heat output
- As measured per CSA B415.1-10 stack loss method
- Higher Heating Value of the fuel
- Lower Heating Value of the fuel
- Performances based on a fuel load prescribed by the standard at 7 lbs/ft³ and with a moisture content between 19% and 25%
- Optimum Overall Efficiency at a specific burn rate (LHV)
- Carbon monoxide
- Recommended Heating Area: Recommended Heating Area and Maximum Burn Time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel Type and other variables. The Recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure
- Maximum heat output-Dry Cordwood: The maximum heat output (Dry Cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lbs/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%
- Optimum Heat Transfer Efficiency: The Optimum Heat Transfer Efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion
- Included - blower, cast iron legs with ash drawer, top air deflector, Ceramic Glass, side panels, ash lip, air damper
- Limited lifetime warranty
Specifications:
- Fuel Type: Dry Cordwood (16 Inch Recommended)
- Recommended Heating Area-ft²: 500 - 2,100
- Overall Firebox Volume-ft³: 2.4
- EPA Loading Volume-ft³: 2.02
- Maximum Burn Time: 8 Hours
- Maximum Heat Output-Dry Cordwood: 75,000 BTU/h (22 kW)
- Overall Heat Output Rate: 14,800 BTU/h (4.34 kW) to 28,600 BTU/h (8.38 kW)
- Average Overall Efficiency (Dry Cordwood): 69% (HHV) - 74% (LHV)
- Optimum Overall Efficiency: 77%
- Optimum Heat Transfer Efficiency: 75%
- Average Particulate Emissions Rate: 1.54 g/h
- Average CO: 89.4 g/h
- Combustion Technology: Non-Catalytic
- High-Efficiency Certified Appliance: Yes, EPA 2020 Approved
- Log Positioning: Loading Over Width
- Type of Chimney: CAN/ULC S629, UL 103 HT (2100 °F)
- Baffle Type: High Quality Vermiculite
- Approved for an Alcove Installation: Yes
- Approved for a Mobile Home Installation: Yes, with Fresh Air Intake
- Door Type: Single, Glass with Cast Iron Frame
- Glass Type: Ceramic
- Firebox lined with Refractory Bricks for better Heat Distribution: Yes
- Stainless-Steel Secondary-Air System Improving Gas Combustion: Yes
- Model: Pedestal
Dimensions:
- Overall Width: 25 5/8 Inch
- Overall Depth: 25 3/4 Inch
- Overall Height: 32 5/8 Inch
- Door Opening Height: 9 Inch
- Door Opening Width: 17 1/2 Inch
- Firebox Height: 12 Inch
- Firebox Width: 21 Inch
- Firebox Depth: 16 1/2 Inch
- Chimney Diameter: 6 Inch
- Flue Outlet Diameter: 6 Inch
- Maximum Log Length: 20 Inch
- Minimum Chimney Height: 12 Feet
- Body Steel Thickness: 1/4 Inch
- Top Steel Thickness: 3/8 Inch
- Glass Surface Width: 16 Inch
- Glass Surface Height: 9 1/4 Inch
Codes and Standards:
- USA standard (Emissions): EPA / ASTM WK47329
- Canadian Standard (Emissions): CSA B415.1-10
- USA Standard (safety): UL 1482, UL 737
- Canadian Standard (safety): ULC-S627
- Tested and Listed as Per Applicable Standards: By an Accredited Laboratory (CAN/USA)
Videos
Manufacturer Resources
Related products
Product Gallery
Questions & Answers
About the Manufacturer
Drolet brand started as a result of the vision of Francois-Xavier Drolet who was a mechanical engineer who started the company from scratch. The brand has a sterling reputation for high quality. The company first worked on the manufacturing of products, which included the industrial pumps. They diversified in to improving the hydraulic elevator and fabrication works for the city's water and sewage lines. The brand is famous for the very widely known Drolet Street Fountains. Today, Drolet offers a huge range of heating systems and related products to increase the comforts of your homes.
Customers Also Viewed
Customer Reviews
Tips & Ideas
How to Pick the Right Cushions and Fabric For Your Outdoor Furniture
How to Choose the Perfect Patio Furniture For Your Home
What You Should Know About Buying Rattan and Wicker Furniture
How to Pick the Right BBQ Grill For You
5 Essential Steps to Take When Preparing For Bathroom or Kitchen Remodeling Work
A New Logo, a Better KB Authority
Affordable Home Improvements You Can Make With Your Tax Return
Transform Your Grilling Experience With Tagwood
https://www.kbauthority.com
with one of the following browsers:
Google Chrome | |
Mozilla Firefox | |
Safari | |
Microsoft Edge |