Drolet DP00070KVG ECO-55 25 1/8 Inch Free Standing Pellet Stove with 3 Inch Ground Floor Kit
Similar Products
Product details
Installation Type | Free-Standing | ||
Fuel Type | Pellet | ||
Style | Transitional | ||
Finish | Blacks | ||
Material | Ceramic / Glass / Iron / Steel | ||
Collection | ECO | ||
Width | 25.13 | ||
Height | 32.63 | ||
Depth | 29.5 | ||
|
Drolet DP00070KVG ECO-55 25 1/8 Inch Free Standing Pellet Stove with 3 Inch Ground Floor Kit
Easy to use and maintain, the Eco-55 pellet stove is ideal for heating spaces up to 2,000 ft². It features intuitive electronic control and easy to use thermostatic control. Cleaning is a breeze, with access to components that are removable without tools. Certified at only 0.96 g/h, the Eco-55 produces up to 39,260 BTU/h, and provides clean and efficient heating.
Features:
- Burn time up to 51 hours (up to 120 hours with the optional hopper extension)
- Hopper capacity of 60 lbs
- Top-feed burner
- Proudly made in Canada
- Certified for mobile home and alcove installation
- Average Particulate Emissions Rate: This appliance is officially tested and certified by an independent agency
- Values are as measured per test method, except for the Recommended Heating Area, firebox volume, Maximum Burn Time and maximum heat output
- As measured per CSA B415.1-10 stack loss method
- Higher Heating Value of the fuel
- Lower Heating Value of the fuel
- Performances based on a fuel load prescribed by the standard at 7 lbs/ft³ and with a moisture content between 19% and 25%
- Optimum Overall Efficiency at a specific burn rate (LHV)
- Carbon monoxide
- Recommended Heating Area: Recommended Heating Area and Maximum Burn Time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel Type and other variables. The Recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure
- Maximum heat output-Dry Cordwood: The maximum heat output (Dry Cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lbs/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%
- Optimum Heat Transfer Efficiency: The Optimum Heat Transfer Efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion
- Included - 4 Inch Vortex pellet vent basement kit (one stove adapter, one 3"Ø to 4"Ø increaser stove adapter, two tees with cap, four pipe lengths: 12 Inch, 18 Inch, 24 Inch and 36 Inch, one slip (adjustable section) - 9 Inch Length, two 90° elbows, one wall pass-thru, two wall supports and one jet cap), blower, ceramic glass, ash lip
- Limited lifetime warranty
Specifications:
- Fuel Type: Pellet (Premium grade or better)
- Recommended Heating Area: 500 ft² - 2,000 ft²
- Hopper capacity: 60 lbs (27 kg)
- Maximum Burn Time: 51 Hours
- Maximum Heat Input Rate: 39,260 BTU/h (11.5 kW)
- Overall Heat Output Rate: 6,648 BTU/h (1.95 kW) - 28,540 BTU/h (8.36 kW)
- Average Overall Efficiency: 70.3% (HHV)
- Average Overall Efficiency: 75.8% (LHV)
- Optimum Efficiency: 78.4%
- Optimum Heat Transfer Efficiency: 73%
- Burn rate: 1.2 - 4.7 lbs/h
- Average Particulate Emissions Rate: 0.96 g/h
- Average CO: 7.6 g/h
- Average electrical power consumption-ignition cycle: 3.02A (360W)
- Average electrical power consumption for continuous operation: 1.3 - 2.5A (51 - 140W)
- Combustion Technology: Top-feed
- High-Efficiency Certified Appliance: Yes, EPA 2020 approved
- Electronic igniter: Yes
- Type of Chimney: ULC/ORD-C441, CAN/ULC S609, UL 641 (Type L)
- Baffle Type: Stainless steel
- Approved for an Alcove Installation: Yes
- Approved for a mobile home installation: Yes, with fresh air intake
- Door Type: Single, Glass with Cast Iron Frame
- Safe and removable handle: Yes
- Glass Type: Ceramic
- Glass air-wash system: Yes
- Premium quality blower included (CFM): 176
- Noise level at 6 feet: 47 dBa (+/- 3 dBa) - 60 dBa (+/- 3 dBa)
- Voltage and frequency: 120 VAC / 60 Hz
Dimensions:
- Overall Width: 25 1/8 Inch
- Overall Depth: 29 1/2 Inch
- Overall Height: 32 5/8 Inch
- Glass surface Width: 15 3/4 Inch
- Glass surface Height: 8 1/8 Inch
- Flue outlet diameter: 3 Inch
Codes and Standards:
- USA standard (Emissions): ASTM E2779
- Canadian Standard (Emissions): CSA B415.1-10
- USA Standard (safety): UL 1482, ASTM E1509
- Canadian Standard (safety): ULC S627
- Tested and Listed as Per Applicable Standards: By an Accredited Laboratory (CAN/USA)
Manufacturer Resources
Product Gallery
Questions & Answers
About the Manufacturer
Drolet brand started as a result of the vision of Francois-Xavier Drolet who was a mechanical engineer who started the company from scratch. The brand has a sterling reputation for high quality. The company first worked on the manufacturing of products, which included the industrial pumps. They diversified in to improving the hydraulic elevator and fabrication works for the city's water and sewage lines. The brand is famous for the very widely known Drolet Street Fountains. Today, Drolet offers a huge range of heating systems and related products to increase the comforts of your homes.