Saniflo SFA 013_087_005 Sanibest Pro Grinder Elongated Toilet Bowl Kit with 1.28 GPF Insulated Tank and 1 HP Pump
Similar Products
Product details
UPC | 00859925002251 | ||
Type | Two Piece | ||
Shape | Elongated | ||
Features | ADA Compliant / Insulated Tank / Seat Included / Soft Close | ||
Installation Type | Floor Mounted | ||
Theme | Contemporary / Modern | ||
Included | Hardware / Seat | ||
Material | Vitreous China | ||
Finish | White | ||
Gallons Per Flush | 1.28 GPF | ||
Collection | Sanibest Pro | ||
Length | 28.75 | ||
Width | 17.75 | ||
Height | 31 | ||
|
Saniflo SFA 013_087_005 Sanibest Pro Grinder Elongated Toilet Bowl Kit with 1.28 GPF Insulated Tank and 1 HP Pump
The Sanibest Pro is a 1 HP pump system used to install a complete bathroom up to 25 feet below the sewer line, or even up to 150 feet away from a soil stack. It incorporates a grinder system which is ideal for uncontrolled environments in both residential and commercial applications (ie. rental unit, offices, warehouses, etc.). The Sanibest Pro is designed to handle sanitary products that may have been flushed down the toilet; such may consist of condoms, sanitary napkins, q-tips, dental floss, etc.
The inside of the Sanibest Pro comprises of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel cutting blade and the pump. When the flush is activated, the water flowing into the Sanibest Pro activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A common spindle/shaft drives the impeller and the blades. The moving parts therefore are kept to an absolute minimum. Water and organic waste matter enter the chamber and are reduced to slurry as the blades rotate at 3600 RPM. The reduced solids are picked up at the bottom and the impeller mounted beneath the motor ejects the waste.
The unit pumps the effluent upward to 25 feet and/or 150 feet horizontally (with gravity fall). Once the water level in the container goes down, the micro switch deactivates. A normal operating cycle for the Sanibest Pro takes about 10 - 12 seconds depending upon the discharge pipe run configuration.
In addition, the Sanibest Pro will also discharge gray water from a variety of other sanitary fixtures such as: a sink, a bath/shower, a urinal and even a washing machine (indirect connection). When adding a bathtub/shower, a base will have to be constructed. This base should be made out of a 2”x 8” on edge to allow for the installation of a p-trap and the required 1/4” per foot gravity flow towards the pump unit.
The wastewater from other sanitary fixtures is discharged into the Sanibest Pro via two 2-inch inlets on either side of the housing. The discharge elbow on top of the Sanibest Pro can be rotated 360 degrees depending on the discharge installation. A non-return valve (included in assembly) prevents back flow into the unit.
This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent. The use of mechanical vents, air admittance valves or similar devices are not permitted as these are considered one-way air vent systems. It is highly recommended for the system to be connected to a Ground Fault Interrupter (GFI) circuit.
Periodic maintenance can be accomplished easily without having to disconnect the unit from either the toilet or the rest of the plumbing system. Through a service panel, a service contractor can easily access the electrical components as well as the level sensor mechanism of the pump. The Sanibest Pro unit must be connected to our rear discharge toilet. This system uses much less water than a regular toilet.
The Sanibest Pro has been certified to American and Canadian Standards. Macerating standard; US: CSA Certified & IAPMO (UPC) listed - ASME A112.3.4, CA: Macerating Standard CSA B45.9.
Bowl and Tank Features:
- Rear-outlet white bowl with 16–3/4" seating height
- Elongated shape
- Vitreous china material
- Available in white color
- Includes soft-close toilet seat along with mounting hardware kit
- Large 3" trapway with water spot measuring
- Insulated toilet tank, 1.28 GPF / 4.8 LPF
Pump Features:
- Discharges the waste through a 3/4” or 1” rigid pipe. A non-return valve is included on the discharge elbow assembly provided with the system. This elbow can be rotated 360 degrees depending on the discharge installation.
- Has been designed with a 1–1/2” vent connection on the top of the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent as air needs to freely flow both ways. Note: The use of mechanical vents, air admittance valves or similar devices is not permitted.
- Will also discharge gray water from any sink, bath/shower, urinal and even a washing machine (indirect connection). The wastewater will drain into the system via two 2” inlets with built-in check valves on either side of the housing. Note that when adding a bathtub/shower, the base should be raised up by a minimum of 8” off the floor.
- An easy access service panel is located on top of the pump. This will give you easy access to the electrical components such as the capacitor, microswitch, electronic board and membrane
Pump Specifications:
- Pump type: Grinder
- Electrical: 120 V – 60 Hz / 9 Amps (Max)
- Motor: 1 HP oil-filled thermally protected motor
- Capacitor rating: 60 microfarad
- Operating Temperature: 104°F (110°F Max.)
- Power cord length: 49 inches
- Noise level: ≤ 63 dBA (Lp) (measured at 3 ft.)
- Discharge pipe diameter: 3⁄4” or 1” Discharge rate at 25 ft: 19 GPM
- Discharge rate at 3 ft: 38 GPM
- Shut-off head: 38 ft.
- Normal running time: 10-12 seconds
- Capacity: 3.2 gallons / 12.1 liters Inlets: 2” (side), 1–1⁄2” vent (top)
- Method of activation: Membrane/microswitch
- Shower/bathtub base height: 8” min
- Certifying agencies: CSA (IPC, NSPC), IAPMO (UPC)
- Recommended accessories: Descaler, Sanialarm
- Connections: Rear outlet toilet, sink, shower/bathtub, washing machine (indirect connection via laundry sink)
Dimensions:
Videos
Manufacturer Resources
Product Gallery
Questions & Answers
About the Manufacturer
Saniflo offers a wide range of macerating and grinding pump systems as well as drain and condensate pumps. With Saniflo above-floor plumbing technology, you decide where your new bathroom, kitchen or laundry room goes! You are no longer limited to locations where downhill drainage or gravity evacuates waste. You don't even need to be in close proximity to the main waste pipe (soil stack). Smarter, faster, cleaner, Saniflo makes it simple!